mumbaicrusher 
Группа:
Members
Сообщений: 113
Дата регистрации:
мая 2018
|
 |
Отправлено: апреля 21 2020,09:06 |
|
  |
Calcium Silicide Crushing Machine Manufacturer provide various types of cone crushers, and non-standard cone crushers can also be customized according to user needs. Welcome to inquire and buy. Here is the Shibang cone crusher experts tell you: after the cone crusher is repaired What are the requirements for load and load test?
I. No-load commissioning requirements of cone crusher
1. Start and stop according to the start-up procedure. Each managed chain system should meet the technical requirements.
2. The forward or reverse of the moving cone (autobiography) should not exceed 15r / min.
3. The bevel gear should be free of shock and periodic noise.
4. The lubrication system works normally, the oil pressure should be in the range of 0.05 ~ 0.15MPa, and the oil return temperature should not exceed 50 ℃ (the on-board test drive must not exceed 60 ℃).
5. The hydraulic adjustment device of the hydraulic equipment is locked according to its operation procedure, and the ore discharge opening is adjusted to the size required for use.
6. The normal continuous running time should not be less than 2h, generally until the identification requirements are met.
|
